Industrial Cloves Drying Machine Herb Heat Pump Dryer

The clove drying machine is an air energy dryer specially developed for the medicinal herbs such as clove, chrysanthemum, wolfberry, etc features, to ensure that the cloves completely retain the medicinal properties and quality of the medicinal materials during the drying process, and the cloves after drying are not deformed , cracking, no discoloration, no deterioration.

Clove Drying Process

1. Before using the clove dryer for star anise drying, it is necessary to fix the green first, so that the color after drying can meet the requirements. Soak the cloves in nearly boiling water for about 3 minutes. When the color of the cloves turns slightly yellow, pick them up, directly pour the cloves into the drying room of the penetration dryer, and turn on the air-energy heat pump clove dryer. drying.

2. Carry out the drying operation, adjust the clove heat pump dryer to drying mode, adjust the temperature to 60 ℃, and dry for 1 hour. Note that dehumidification is not required at this stage, mainly for color control.

3. Adjust the drying mode of the clove heat pump dryer to drying + dehumidification, adjust the temperature to 55 ℃, and dry for 3 hours. Note that a lot of dehumidification is required at this stage.

4. Keep drying + dehumidification mode, adjust the temperature to 50℃, and dry for 3 hours. Note that a lot of dehumidification is required at this stage.

5. Continue to maintain the drying + dehumidification mode, adjust the temperature to 45°C, and dry for 3 hours. Note that there is relatively little moisture at this stage, and it can be slowly dehumidified

6. Adjust the mode to drying mode, adjust the temperature to 65°C, and dry for 2 hours. The drying program ends.

The air energy heat pump clove stem dryer is a device that uses air heat to dry cloves. It is an intelligent device that is energy-saving and convenient to use. It promotes another new level of drying of clove stems. The clove drying machine advantages:

a Improve the finished product efficiency and reduce the defective rate of dried cloves.

b. Good thermal insulation effect can save 40% of labor costs and 30% of energy consumption.

c. The quality of the dried cloves is good, the output is large, and the added value of the products is high.

d. The cloves drying environment is clean, and there is no discharge of waste gas, waste water and waste residue.

e. It has a wide range of applications, is not limited by climate and environment, and can be produced after a full day.

f. It has a controllable temperature and humidity adjustment function, with high control accuracy and can meet the needs of the high-end market.

Cloves Dehydrator Features

Precise temperature control

The drying temperature can be precisely controlled, and the dried cloves are of good quality

Programmable control

Using touch screen programmable control, after setting the corresponding program, there is no need for manual supervision, easy to use

Closed drying room

During the whole clove drying process, the cloves in the drying room are not in contact with the outside world, which will not cause secondary pollution to the cloves.