+86 15538388305

Product

We offer a wide range of high quality of equipment & machines for food drying.

Home   >   application   >   Vegetable Drying Machine   >   Industrial Fungus Heat Pump Dryer Tremella Drying Machine

Industrial Fungus Heat Pump Dryer Tremella Drying Machine

Model GG-7P
Capacity 300-700kg/time
Voltage 380V50HZ
Size Customize
Material Stainless Steel+PP
Product Introduction >>

Tremella drying machine also called air energy heat pump dryer can greatly shorten the drying cycle of tremella, reduce a lot of energy consumption and carbon emissions, reduce labor costs and loss of manual contact, and greatly improve production capacity and dried tremella quality. It makes up for the traditional white fungus drying, the whole flower is dried to a moisture content of less than 12%, the drying efficiency is low, the production efficiency is low, and the energy consumption is high.

tremella-drying-machine.jpg

Working Principle >>

Tremella Drying Machine Working Process 

1 Tremella harvested and pre-dried

After harvesting Tremella, it can be pre-dried and then dried in sunny days. The content of Tremella vitamins after drying is not easy to be lost. You can also start the heat pump dryer to preheat to about 42 ° C, directly clean and select and drain the water. The white fungus is evenly loaded into the stainless steel tray and pushed into the drying room.


 2 Tremella initial temperature setting

Freshly harvested white fungus has a relatively large water content of more than 80%, and it takes about 3 days to dry in the sun, which is slow and affects production. Using a heat pump dryer can be completed in about 15 hours, the initial drying temperature should be low, it should start from 30 ° C, the drying time is about 5 hours, and the moisture content of the ear flaps is reduced to about 30%.


 3 Tremella drying mid-section temperature

 In the mid-term drying of Tremella, the temperature will be raised to about 55 °C, and the drying time is 5-8 hours. The temperature in the early and final stages of drying should be low, and the temperature in the middle period should be high. If the temperature in the early stage is too high, the moisture of Tremella will not be easily discharged, which will affect the drying of Tremella dry quality.


 4 Tremella after drying

In the late stage of Tremella drying, the ear flaps are nearly dry, and the temperature in the dryer is lowered to about 35°C, and the whole process of drying is completed when the ear bases are completely dry. After the tremella drying is completed, when the cooling is consistent with the normal temperature, the tremella can be graded, packaged and stored.


Advantages >>

Tremella Drying Machine Advantages


1. Tremella dryer drying process, low energy consumption in the drying process, effectively reducing operating costs;

2. The drying process is safe and reliable, and there is no danger of overheating or burning during the drying process;

3. Control the corresponding parameters of Tremella drying, intelligently control the problems in the drying process, and intelligently handle abnormal situations;

4, Automatic temperature and humidity control, high accuracy. Effectively avoid the phenomenon of incomplete drying or excessive drying caused by manual operation, reduce labor intensity and reduce operating costs.

5. The tremella drying process is well ventilated, the surface of the white fungus is heated evenly, and there is no need to manually enter and turn it over. To maintain the gloss of Tremella, the quality of the finished product can be unified without manual separation;

tremella-dryer.jpg

Technical Data >>

Tremella Heat Pump Dryer Parameter

Item

Heat Pump Dryer Parameter

Model

GG-3P

GG-7P

GG-15P

Unit

Environment temperature

-10-43

-15-43

-15-43

Drying temperature range

30-75

30-75

30-75

Rated power

4

12

21

Kw

Maximum power

10

18

33

Kw

Power supply form

380/3/50

380/3/50

380/3/50

V/Ph/Hz

Temperature control accuracy

±1

±1

±1

Electric heating power

6

6

12

Kw

Controller

Single chip microcomputer/PLC+color screen control

Noise level

75

75

75

dBA

Capacity

100-200

300-700

800-1500

Kg

Dehydration capacity

9

21

43

Kg/h=50℃,80%


Product Features >>

Tremella Dryer Machine Features

Equipped with 304 stainless steel tray and PP material tray, choose according to your material needs.

The shelves made of 304 stainless steel are durable, clean and hygienic, in line with food hygiene standards, and are safer.

The heat source adopts a heat pump host, and the temperature is adjustable from 5°C to 85°C, with functions such as heating, dehumidification, and heat recovery.

Airtight drying room, clean and hygienic, pure hot air drying, close to natural drying, so that the dried products are clean and hygienic and meet the food hygiene standards.


Video Display >>
Request A Quote >>
Click to change
0.125454s