+86 18595613260

Product

We offer a wide range of high quality of equipment & machines for food drying.

Home   >   machine   >   Hot Air Drying Oven Machine   >   Industrial Hot Air Circulation Drying Oven Machine

Industrial Hot Air Circulation Drying Oven Machine

Model GG
Capacity 120kg
Voltage 380V50HZ
Size 2430×1200×2375 mm
Material Stainless Steel
Product Introduction >>

The hot air circulation oven drying machine is equipped with a low-noise, high-temperature-resistant axial flow fan and an automatic temperature control system. The entire circulation system is fully enclosed, so that the thermal efficiency of the oven is increased from 3-7% of the traditional drying room to the current 35-45%, and the high thermal efficiency can reach 50%. The successful design of hot air circulation oven, so that our country's hot air circulation oven has reached the advanced level at home and abroad. It has saved a lot of energy for our country and improved the economic efficiency of enterprises.

Working Principle >>

Hot Air Drying Oven Principle

The air circulation system of the hot air circulation oven adopts a fan circulating air supply method, and the air circulation is uniform and efficient. The air source is driven by a circulating air motor (using a non-contact switch) to drive the wind wheel through the heater to send out the hot air, and then to the oven chamber through the air duct, and then suck the used air into the air duct to become the air source and recirculate it. Heating use. Ensure the uniformity of indoor temperature. When the temperature value swings due to the switch] action, the air circulation system quickly restores the operating state until it reaches the setting temperature.

Advantages >>

Hot Air Drying Oven Advantages

1. The whole hot air drying oven adopts a fully enclosed structure, and the hot air box circulates, which is energy-saving and high-efficiency.

2. The use of built-in high temperature resistant circulating fan greatly reduces heat loss and strengthens heat transfer.

3. There is an adjustable air equalizing plate in the box, which can adjust the opening up and down to make the temperature in the box up and down evenly.

4. The thickness of the insulation layer is 80-120mm, and the material is ultra-fine glass wool, which conforms to GMP standards and has low heat loss.

5. The drying car baking tray is the industry standard, and the baking tray net disk is suitable for multiple industries and has strong interchangeability.

6. Automatic constant temperature control, fixed working time, mechanized production, stable batch product quality.

Technical Data >>

Hot Air Dryer For Food Parameter


Model

GG

Baking car

2

Baking pan

24

Custom processing

Yes

Operation method

Intermittent

Dry amount per time

120kg

Equipped with power

1.1kw

Steam consumption

20kg/h

Cooling area

20m2

Air volume

2800m3/h

Dimension

2430×1200×2375 mm


Product Features >>

Hot Air Drying Machine Features

1.The whole hot air drying machine is made of stainless steel wire drawing board

The whole box adopts a fully enclosed structure, and the hot air box circulates, which is energy-saving and high-efficiency.

2.Using built-in high temperature resistant circulating fan

Greatly reduce heat loss and strengthen heat transfer.

3.A compulsory exhaust fan is installed on the top

Forced exhaust at the top, regularly exhausts the water vapor inside the box to improve drying efficiency

4.Solid state relay control heating system

Use solid state relays to control the heating system to avoid the safety hidden caused by repeated pull-in of ordinary relays

5.The baking tray of the drying car is the unified standard of the industry

Baking disk network disk is suitable for multiple industries and has strong interchangeability.

6.Automatic constant temperature control

The working hours are fixed, and the quality of mechanized production batches is stable.

Video Display >>

Request A Quote >>
Click to change